Homing Switch
| 750mm Homing Switch Kit | ||
| SKU | Name | Quantity |
| 30557-02 | Microswitch | 1 |
| 25285-57 | Socket Head Screw M2 x 14 | 2 |
| 30555-03 | Washer, Split Lock M2 Stainless | 2 |
| 25284-12 | Hex Nut M2x0.4 | 2 |
Attach Home Switch to X-Carriage
Don’t forget to do this before you put the X-Carriage onto the makerslide rail!
If you ordered your kit with home switches, you’ll want to install the limit switch for the X-Carriage at this point. You’ll need 2x M2x14mm socket head cap screws, 2x M2 split ring washers, 2x M2 nuts, and a single microswitch from your kit. Put a split washer on each screw and insert them into the respective holes on the switch and x-carriage. Remember to position the switch so that the roller actuator is facing down and to the outside. Secure each screw with an M2 nut. You’ll need a 1.5mm hex key for the screw and a small pair of pliers to hold the M2 nut. If you happen to have a 4mm wrench or socket you can also use that.
NOTE: Make sure to position the protruding "split" of the split ring washer away from the plastic microswitch as that may cut into and damage the switch when tightened.
