X-Carve Instructions / 750mm / Gantry - X-Carriage / Stepper Motor

Stepper Motor

Core Components Kit
SKU Name Quantity
25285-54 Socket Head Screw M5 x 10 4
750mm Motor and Wiring Kit
SKU Name Quantity
25311-06 Stepper Motor - NEMA 23 1

Attach Stepper Motor to X-Carriage

To attach a stepper motor to the X-Carriage, you’ll need 4x M5x10mm socket head cap screws. Place the motor on the X-Carriage with the white connector facing up. Use a 4mm hex key to secure the motor in place using the threaded holes on the carriage. There may be a small gap between the motor and the carriage due to the heads of the M5x35mm flat head screws that hold the smooth idlers. Tighten the screws in an alternating pattern to ensure that they are evenly secured.

Next Step: Drag Chain Bracket