Adjustable V-Wheels
| Core Components Kit | ||
| SKU | Name | Quantity |
| 25286-49 | Button Head Cap Screw M5 x 30 | 4 |
| 25195-07 | Short Eccentric Spacer | 4 |
| 25287-12 | M5 Flat Washer | 4 |
| 25203-01 | V Wheel Assembly | 4 |
| 30265-09 | Nylon Insert Lock Nut M5 | 4 |
Attach Adjustable V-Wheels
Begin by placing an short eccentric spacer (25195-07) on an M5x30mm bolt, then put the bolt and spacer into one of the holes for the adjustable v-wheel. Make sure that the ‘shoulder’ of the spacer is facing the carriage and fits into the hole on the plate. Place an M5 washer and v-wheel onto the bolt, then tighten the assembly with a nylock nut.
Now you can repeat this process for the other three holes. Your carriage should look like this when you’re done:
