X-Carve Instructions / 1000mm / Assemble Gantry / Attach X-Carriage Assembly

Attach X-Carriage Assembly

Slide the completed x-carriage onto the makerslide rail. If the x-carriage does not slide on smoothly, you may need to adjust the v-wheels with the eccentric spacers. The spindle mount should face in the same direction as the X-Carve logo and the beveled side of the plate. At this point you should insert two pre-assembly insertion nuts into the groove on the top of the makerslide. These allow for your belts to be tensioned. You may leave them loose for now.

Next Step: Side Plate - Right